XYZ Beach Cruisers Blog

The following instructions are for separately purchased fenders (Deluxe beach cruisers with thicker frame). We also sell chrome fenders for Easyrider beach cruisers. See info in the bottom. If you are technically challenged I strongly recommend to have bike shop install the fenders for you.

Parts needed for fender installation

• 2 fenders (front and rear)
• 8 small bolts and nuts
• 4 fender braces

The above parts comes in the package with fenders. See photos:

You will also need small bolt for securing the rear fender and big bolt and nut for securing the front fender. They are included in the main box with beach cruiser sold and located in the small plastic bag with reflectors.

FRONT WHEEL FENDER INSTALLATION

Use the 8 small nuts and bolts and attach braces to fenders.

Remove the front wheel and attach the front fender at the top of the fork.

Secure fender braces on the axle outside of the fork. Tighten the nut on axle.

Adjust the braces. If you feel that the fenders are not straight push the braces and adjust the fender. The goal is that fender should not touch tire. Braces are flexible and has to be adjusted in case they don’t fit perfectly after you install them.

REAR WHEEL FENDER INSTALLATION

Completely remove the rear wheel. You have to remove coaster brake.

Add fender braces using the small nuts and bolts.

Turn the bike upside down for further installation.

Secure the rear fender with small bolt located in the bottom of the bike. No nut required. Just screw it in.

Install the wheel back. Put the chain on.

Attach fender braces on the rear axle and secure with axle nuts. Attach and secure coaster brake.

You are done! Enjoy your beach cruiser with fenders!

Easyrider beach cruiser fenders

Installation process for Easyrider fenders is very similar to Deluxe models. We currently offer only chrome fenders for Easyrider bikes.

• 2 fenders (front and rear)
• 5 small bolts and nuts
• 2 fender braces

The above parts comes in the package with fenders. The difference from Deluxe fenders is that you get only two braces and therefore you need just four small bolts and nuts. The big bolt and nut for securing the front fender is included with your bicycle. Also the small bolt for securing the rear fender is included with the bike.

Popularity: 21% [?]